43
z
Function: There are various devices for you to select.
z
Baud rate: You can select proper baud rate.
z
Data bit: You can select proper data bit.
z
Stop bit: There are three values: 1/1.5/2.
z
Parity: there are three choices: none/odd/even.
System default setup is:
z
Function:
COM
z
Baud
rate:
115200
z
Data bit: 8
z
Stop bit: 1
z
Parity:
None
After completed all the setups please click save button, system goes back to the
previous menu
Figure 5-9
5.3.5 Network
Here is for you to input network information. See Figure 5-10.
z
IP address: Here you can input IP address.
z
DHCP: It is auto search IP function. When enable DHCP function, you can not
modify IP/Subnet mask /Gateway. These values are from DHCP function. If you
have not enabled DHCP function, IP/Subnet mask/Gateway display as o. You
need to disable DHCP function to view current IP information. Besides, when
PPPoE is operating, you can not modify IP/Subnet mask /Gateway.
z
TCP port: Default value is 37777. (System server port 37778 is reserved for
network UDP use.)
z
UDP port: Default value is 37778.
z
HTTP port: Default value is 80.
z
Max connection: system support maximal 10 users. 0 means there is no
connection limit.
z
Transfer mode: Here you can select the priority between fluency/video qualities.
z
Network
download:
System
can process the downloaded data first if you enable
this function.
After completed all the setups please click save button, system goes back to the
previous menu.
