31
Figure 4-27
Tips:
During backup process, you can click ESC to exit current interface; but the
system will not terminate backup process.
Note:
When you click stop button during the burning process, system can backup the data
before you click stop button. For example, if there are ten files, you click stop when
backup the fifth file, system only save the previous five file data in the device. But you
can still see ten file names
The file name format usually is: SN_CH+channel time Y+M+D+H+M+S.
In the file name, the YDM format is the same as you set in general interface.
(Main Menu ->Setting ->General).
4.7.1.1 One-key backup function
When there is no displayer connected, you can use one-key backup function. See
Figure 4-28.
Figure 4-28
Please follow the steps listed below.
z
Default backup day is 1 day.
z
Click the F1 button in the remote control, you can see one-key backup
interface. The initial progress bar is 0%. If system meets all the conditions,
system automatically begin backup.
z
If you want to terminate the backup during the whole process, you can click
“stop” button and then remove backup device.
