IBM xSeries 100, Problem Determination And Service Manual

Page: 75 / 126

Removing the bezel
When working with some devices, such as additional optical drives, you must first
remove the bezel to access the device.
To remove the bezel, complete the following steps.
Bezel
release
tabs
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 55.
2. Turn off the server and all peripheral devices; then, disconnect the power cords
and all external cables.
3. Remove the cover (see “Removing the cover” on page 57).
4. From inside the chassis, press up and out on the bezel release tabs to
disengage them from the chassis; then, lift the bezel off of the front of the
server.
5. If you are instructed to return the bezel, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
6. If you are not returning the bezel, store it in a safe place for reuse.
Chapter 4. Removing and replacing server components
59