IBM Universal Tape Library, User Manual, Page: 70 / 96

Table 21. SNMP trap list (continued)
Event Event description Category Reported by
Selftest display bram failure The diagnostic buffer that is used to report
test results is not large enough to hold the
data.
Critical Diagnostics
Scb-fpga camera fifo fail The memory on the system controller
board has failed to read the memory that
is used to transfer data.
Critical Diagnostics
Test details buffer overflow
(len/testId)
The diagnostic buffer that reports test
results is not large enough to hold the
data.
Critical Diagnostics
Test record semaphore locked
(index/tx-status)
An internal firmware error has occurred. Critical Diagnostics
Test structure corrupt (testId) An internal firmware error has occurred. Critical Diagnostics
Insufficient num cart for test
(num)
There are not enough tape cartridges in
the library to complete the system test.
Warning Diagnostics
Insufficient num drives for test
(num)
There are not enough tape drives in the
library to complete the system test.
Warning Diagnostics
Insufficient num empty slots for
test (num)
There are not enough empty bins in the
library to complete the system test.
Warning Diagnostics
Hand-cal offset fail The library failed the calibration test that
computes offsets for the robotic hand.
Critical Diagnostics
Hand-theta cal offset fail The library failed the calibration test that
computes offsets for the robotic hand in
rotation.
Critical Diagnostics
Hand-trans cal offset fail The library failed the calibration test that
computes offsets for the robotic hand in
translation.
Critical Diagnostics
XY & hand cal offset fail The library failed the calibration test that
computes offsets for the robotics tray.
Critical Diagnostics
XY & hand_theta cal offset fail The library failed the calibration that
computes offsets for the robotics tray and
robotics hand.
Critical Diagnostics
XY & hand_trans cal offset fail The library failed the calibration test that
computes offsets for the robotics tray and
robotics rotation.
Critical Diagnostics
XY & Z cal offset fail The library failed the calibration test that
computes offsets for the robotics tray and
the robotics up and down motion.
Critical Diagnostics
XY-cal offset fail The library failed the calibration test that
computes offsets for the robotics tray.
Critical Diagnostics
Z & hand cal offset fail The library failed the calibration test that
computes offsets for the robotics tray up
and down and robotics hand.
Critical Diagnostics
Z & hand_theta cal offset fail The library failed the calibration test that
computes offsets for the robotics tray up
and down and robotics hand rotation.
Critical Diagnostics
Z & hand_trans cal offset fail The library failed the calibration test that
computes offsets for the robotics tray up
and down and robotics hand translation.
Critical Diagnostics
60
Universal Tape Library User’s Guide