IBM Universal Tape Library, User Manual, Page: 21 / 96

Table 4. Back mounting bracket positions (continued)
Rack depth Use mounting holes
30 inches or less A and C
31 inches or less B and D
32 inches or less C and E
33 inches or less D and F
34 inches or less E and G
35 inches or less F and H
36 inches or less G and I
10. Attach a back mounting bracket to each side of the library, using two M5 x 8
hex screws as shown in Figure 9.
11. Place the library in the rack and attach the two mounting clamps (see
Figure 10 on page 12):
v If the rack depth is less than 30 inches, attach each mounting clamp with
the long portion of the mounting clamp toward the back of the rack.
v
If the rack depth is greater than 30 inches, attach each mounting clamp with
the long portion of the mounting clamp toward the front of the rack.
Back mounting
bracket
Hex screws
Hex screws
Figure 9. Installing the back mounting brackets
Chapter 2. Installing and configuring the library
11