IBM Universal Tape Library, User Manual, Page: 35 / 96

Chapter 4. Using the Remote Management utility
Use the Remote Management utility to perform the following tasks:
v Display library status information
v
Perform library operations
v Perform library configuration tasks
v
Work with the library remotely
v Access other Web sites and library identification information
Figure 15 shows the options in the Remote Management utility.
To run the Remote Management utility, complete the following steps:
1. Make sure that the library is connected to an Ethernet network.
2. Make sure that the library is turned on.
3. Open a Web browser and enter the IP address of the library in the following
format: http:// ipaddress .
4. Type the user name and password and click OK . The Remote Management
utility home page is displayed.
Note: The default user name and password is
admin
.
Displaying library information
Use the Status page to display the following information:
v
Status overview
v
Hardware status
v
Event log
v
Statistics
v
Drive log
Table 10 on page 26 describes the information and the access procedures.
Maintenance
Hardware
status
Event log
Statistics
Drive log
Status/
overview
Operations Setup Utilities Reference
Find Identification Library Links
Users Selftests About
Move
SCSI or Fibre
Channel
Inventory Network
Drives Events
Date & Time
Library
Find
barcode
Find
media ID
Figure 15. Menu items
© Copyright IBM Corp. 2007
25