IBM Universal Tape Library, User Manual, Page: 37 / 96

Table 11. Operations page tasks
Action Description Access procedure
Find Use the Find page to find cartridges according
to either the bar code or the media ID, and
display information about library components in
a physical or logical map.
The asterisk (*) and question mark (?)
characters can be specified as wildcard
characters.
The physical map displays a high-level
physical representation of the library. Select a
component to display details about that
component.
The logical map lists the components of the
library. Select a component to display details
about that component.
To find cartridges or display component
information, complete the following steps:
1. From the Status page, click the Operations
tab. The Operations page is displayed.
2. From the Operations page, click the Find tab.
The Find page is displayed.
3. Perform one of the following tasks:
v Type a bar code and click Find . All
cartridges that meet the specified criteria
are displayed. Leave the bar code field
blank to display the bar codes of all the
cartridges in the library.
v
Type a media ID and click Find . All
cartridges that meet the specified criteria
are displayed. Leave the media ID field
blank to display the media ID of all the
cartridges in the library.
4. Click the bar code or media label of the
cartridge that you want to display more
information about.
To display a physical or logical view of the library
components, click Physical/Logical .
Move cartridges Use the Move page to move a cartridge. To move a cartridge, complete the following steps:
1. From the Status page, click the Operations
tab. The Operations page is displayed.
2. From the Operations page, click the Move tab.
The Move page is displayed.
3. Specify the following source information:
v
Partition (library name)
v
Element
v
Position
4. Specify the following destination information:
v
Partition (library name)
v
Element
v
Position
5. Click Apply .
Inventory
cartridges
Use the Inventory page to perform a cartridge
inventory.
To perform a cartridge inventory, complete the
following steps:
1. From the Status page, click the Operations
tab. The Operations page is displayed.
2. From the Operations page, click the Inventory
tab. The Inventory page is displayed.
3. Select the library for which you want to
preform an inventory.
4. Click Apply to start the inventory.
Chapter 4. Using the Remote Management utility
27