IBM Universal Tape Library, User Manual, Page: 67 / 96

Table 20. Error codes (continued)
Error
code Description Recommended action
95 The library firmware update has
failed.
Retry the operation. See Table 13 on page
32 for more information about updating the
firmware.
96 An incorrect firmware image was
used to update the firmware.
Retry the operation with the correct firmware.
97 The firmware image is too large. Retry the operation with the correct firmware.
98 The erase firmware operation has
failed.
Retry the operation. If the problem recurs,
contact IBM support.
99 A firmware update program has
failed.
Retry the operation. If the problem recurs,
contact IBM support.
9A An incorrect checksum was
calculated.
Retry the operation. If the problem recurs,
contact IBM support.
9B A firmware updated has started
incorrectly.
Retry the operation. If the problem recurs,
contact IBM support.
9C The firmware image version is
incorrect.
Retry the operation with the correct firmware.
If the problem recurs, contact IBM support.
9D The firmware checksum value is
incorrect.
Retry the operation with the correct firmware.
If the problem recurs, contact IBM support.
9E The firmware image is smaller than
expected.
Retry the operation with the correct firmware.
If the problem recurs, contact IBM support.
9F The firmware image is larger than
expected.
Retry the operation with the correct firmware.
If the problem recurs, contact IBM support.
A2 A servo task has not completed. Retry the operation. If the problem recurs,
replace the library chassis. See “Removing
the library chassis” on page 43 for more
information.
AE A servo task did not begin correctly. Retry the operation. If the problem recurs,
replace the library chassis. See “Removing
the library chassis” on page 43 for more
information.
Appendix B. Error codes
57