IBM Turbo 16/4 Token-Ring PC Card 2, User Manual

Page: 94 / 123

Error Code Explanation and Action
TOKENCS-DOS-205 The PC Card did not reset during initialization.
Explanation:
During initialization, no interrupt occurred.
User Action:
This can happen if you are using an enabler
and it is setting an interrupt level that is
different from the interrupt level
TOKENCS.COM is using. Check to make
sure that both interrupts are the same.
TOKENCS-DOS-206 An interrupt failed to occur during initialization.
Explanation:
During initialization, no interrupt occurred.
User Action:
This can happen if you are using an enabler
and it is setting an interrupt level that is
different from the interrupt level
TOKENCS.COM is using. Check to make
sure that both interrupts are the same.
TOKENCS-DOS-226 The ROM and shared RAM address ranges overlap.
Explanation:
The ROM and RAM memory areas are
overlapping.
User Action:
Check the settings in NET.CFG for MEM #1
and MEM #2. MEM #1 determines the ROM
(MMIO) base address. MEM #2 determines
the Shared RAM base address. If you are
using an enabler, check where it is placing
the ROM (MMIO) and the RAM address.
ROM is 8 KB in size. RAM is usually 16 KB in
size.
TOKENCS-DOS-228 The MAX FRAME SIZE in NET.CFG file is too large
(Max=17 960)
Explanation:
The maximum frame size has been
exceeded.
User Action:
Change the maximum frame size to a valid
value.
TOKENCS-DOS-229 The MAX FRAME SIZE in NET.CFG file is too small
(Min=632).
Explanation:
The maximum frame size is too small.
User Action:
Increase the maximum frame size to a valid
value.
78
Turbo 16/4 Token-Ring PC Card 2