IBM Turbo 16/4 Token-Ring PC Card 2, User Manual

Page: 70 / 123

Error Code Explanation and Action
IBMTOKEN-xx-214 The configured data rate for the adapter does not
match that of the network.
Explanation:
The operational speed of the Token-Ring
network does not match the configured speed
of the adapter.
User Action:
Change the setting of the DataRate
configuration parameter to match the speed of
the network to which the adapter is attached.
Your local network administrator should be
able to tell you which speed to use. Setting
the DataRate parameter value to AUTO will
allow the adapter to automatically determine
the correct speed setting to use when
connecting to the network, provided that this
is not the only adapter active on the Token
Ring. Consult the adapter installation
instructions for additional information on
setting the DataRate parameter.
IBMTOKEN-xx-215 An adapter timeout occurred while attempting to insert
into the network.
Explanation:
The Token-Ring network is not functioning
correctly.
User Action:
Contact your local network administrator to
determine the status of your network, or try
connecting again at a later time.
IBMTOKEN-xx-216 A ring failure condition was detected while attempting
to insert into the network.
Explanation:
The Token-Ring network is not functioning
correctly.
User Action:
Contact your local network administrator to
determine the status of your network, or try
connecting again at a later time.
IBMTOKEN-xx-217 A ring beaconing condition was detected while
attempting to insert into the network.
Explanation:
The Token-Ring network is not functioning
correctly.
User Action:
Contact your local network administrator to
determine the status of your network, or try
connecting again at a later time.
54
Turbo 16/4 Token-Ring PC Card 2