IBM Turbo 16/4 Token-Ring PC Card 2, User Manual

Page: 80 / 123

Error Code Explanation and Action
LTG0029I The PC Card encountered a lobe wire fault.
Explanation:
The PC Card will be closed.
User Action:
Perform the following steps:
1. Check and secure all cable connections
between your PC Card and the
Multistation Access Unit (MSAU). Correct
any related problems and try the operation
again.
2. If there are no related problems, refer to
the documentation that was shipped with
your PC Card to run diagnostics; then, try
the operation again.
3. If the problem persists, print or save the
LANTRAN.LOG file and contact your LAN
administrator.
LTG0030I There are not adequate receive bufers for the PC Card
to open.
Explanation:
The requested DIR.OPEN.ADAPTER
paramaeter has not allowed enough receive
buffer space in the PC Card shared-RAM
area.
User Action:
Reduce the RAM requirements by
reconfiguring the parameters in
PROTOCOL.INI. The parameters that will
reduce the space requirements for the receive
buffer are the transmit buffers (if more than
one is specified).
LTG0032I An invalid node address error occurred when the
program attempted to open the PC Card.
Explanation:
The node address defined is not valid.
User Action:
Specify a valid node address. Refer to the
IBM Token-Ring Network Architecture
Reference (SC30–3374) for node address
restrictions.
64
Turbo 16/4 Token-Ring PC Card 2