IBM Turbo 16/4 Token-Ring PC Card 2, User Manual

Page: 69 / 123

Error Code Explanation and Action
IBMTOKEN-xx-211 A possible lobe wire failure was detected while
attempting to insert into the network.
Explanation:
The adapter is not correctly connected to the
Token-Ring network.
User Action:
Check that the cable is securely attached to
both the adapter and to the Token-Ring
network. You might need to contact your local
network administrator to ensure that the
cabling in the building is intact and that the
network concentrator to which you are
attached is operational. If the error persists,
try using a different cable.
IBMTOKEN-xx-212 A signal loss condition was detected while attempting
to insert into the network.
Explanation:
The Token-Ring network is not functioning
correctly.
User Action:
Contact your local network administrator to
determine the status of your network, or try
connecting again at a later time.
IBMTOKEN-xx-213 The lobe wire connected to the adapter is not attached
to the network.
Explanation:
The adapter is not correctly connected to the
Token-Ring network.
User Action:
Check that the cable is securely attached to
both the adapter and to the Token-Ring
network. You might need to contact your local
network administrator to ensure that the
cabling in the building is intact and that the
network concentrator to which you are
attached is operational. If the error persists,
try using a different cable.
Appendix B. Problem Determination
53