IBM Turbo 16/4 Token-Ring PC Card 2, User Manual

Page: 88 / 123

Error Code Explanation and Action
LTG0060I The open error type is REMOVE received.
Explanation:
While attempting to insert into the ring, your
computer received a command forcing this
PC Card to remove from the ring.
User Action:
Contact your LAN administrator to determine
why the REMOVE command was issued for
your computer.
LTG0063I Your computer is the first attempting to insert onto the
ring in AUTORINGSPEED mode.
Explanation:
User Action:
Either remove the AUTORINGSPEED
keyword from PROTOCOL.INI or make sure
that another computer is on the network and
has set the ring speed. If the problem
persists, print or save the LANTRAN.LOG file
and contact your LAN administrator.
LTG0064I Physical insertion of your computer onto the ring failed.
Explanation:
User Action:
Check the PC Card configuration and retry
the open request. If the problem persists,
refer to the documentation that was shipped
with your PC Card to run diagnostics; then,
try the operation again.
LTG0070I A problem was detected on microcode level 00 00 00
C2 45 50.
Explanation:
User Action:
Request and install engineering change
ECA0066, P/N 92F9122, on your system, or
use the configuration feature of the LAN
Adapter Protocol Support installation program
to change the value for the number of
transmit buffers to be greater than 1.
LTG0083E Token-Ring Credit Card Request I/O failed.
Explanation:
Card Services would not give IBMTOKCS
access to the I/O ports it requested.
User Action:
Make sure that no other PC Cards are using
the range of I/O ports that the adapter needs.
For a primary PC Card the range is A20–A23.
For a secondary PC Card the range is
A24–A27.
72
Turbo 16/4 Token-Ring PC Card 2