IBM Turbo 16/4 Token-Ring PC Card 2, User Manual

Page: 22 / 123

3. To attach the cable to the PC Card, move the latching button (the
half-circle in the center of the PC Card connector) toward the cable. The
cable cannot be connected or disconnected unless the latch is retracted.
Attach the cable to the PC Card with the part number on the bottom.
The connector is keyed to attach to the PC Card only one way. If you
feel any resistance, remove the connector, turn it over, and reattach it.
Part Number
(on bottom)
Latching Button PC Card
4. To lock the cable securely, move the latching button in toward the PC
Card. In some cases, you might want to leave the PC Card cable latch
retracted. If the PC Card cable is pulled, it will disconnect from the PC
Card, possibly saving your computer from being pulled off a table.
5. Insert the PC Card in the slot. If you are using a point enabler, note
which slot you use.
PC Card
PC Card Slot
The PC Card is keyed to go in only one way. If you feel resistance
before the PC Card is fully inserted, remove the PC Card, turn it over,
and reinsert it.
6. Switch ON (|) the power to the computer.
7. Return to page 3 to continue. Step 3 of the Installation Checklist is now
complete.
Removing the PC Card
Note: If you are using Card and Socket Services, you may be able to use
hot-pluggability features with your PC Card. See “Hot-Pluggability and
Suspend/Resume Issues” on page 7 for more information.
Follow these steps to remove the PC Card:
6
Turbo 16/4 Token-Ring PC Card 2