IBM TotalStorage SAN Volume Controller, Installation Manual

Page: 23 / 123

Using the following inspection checklist as a guide, inspect the UPS for unsafe
conditions. If necessary, see any suitable safety publications.
1. If any equipment has been damaged during the shipment, keep the shipping
cartons and packing materials.
2. File a claim for shipping damage within fifteen days of receipt of the equipment.
Emergency power-off event
The SAN Volume Controller and uninterruptible power supplies (UPSs) will
occasionally undergo an emergency power-off (EPO) shutdown.
In the event of a room EPO shutdown, the UPS 5115 will automatically shut down
within 5 minutes of the input power being removed. When the UPS 5125 detects a
loss of input power, this is reported to the SAN Volume Controller which completes
the process of shutting down the output from the UPS 5125 within 5 minutes.
Attention: If an EPO event occurs and the UPS 5125 is not connected to at least
one operational SAN Volume Controller, you must unplug the output cables of the
UPS 5125 to remove output power from the UPS.
Checking the safety labels on the SAN Volume Controller
Ensure that you check and understand the safety labels on the SAN Volume
Controller.
The following steps describe how to check the labels on the SAN Volume
Controller.
Perform the following label checks:
1. Agency/ratings label. See Figure 1.
2. No user access label. See Figure 2.
3. Class 1 laser label. See Figure 3 on page xxii.
VCCI-A
A
R33026
CANADA ICES/NMB-003 Class/Classe (A)
This machine is manufactured
from new parts or new and
used parts.
ME01
SAN JOSE
CA, USA
Registered Trademark
of International Business
Machines Corporation
IBM Canada Ltd.
Registered User
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Marca Registrada
Æ
US C
IEC 60950
LR34074C
E-D019-00-3904(A)
P/N
18P5457
MACHINE TYPE 2145
MODEL:
4F2
RATING:
100-240V , 50/60Hz
3.5- 1.75A
P/N 64P7837
XX
Figure 1. Agency/ratings label for the SAN Volume Controller
Figure 2. No user access label for the SAN Volume Controller
About this guide
xxi
|
|
|
|
|
|
|