IBM TotalStorage L10, Cli Reference Manual

Page: 79 / 96

© Copyright IBM Corp. 2004
67
Appendix A. Event messages
The L10 storage switch’s event messages are listed below. For explanations, contact a
customer service representative. The message’s applicable severity level as defined
below are given before each message.
These severity levels can be used to designate which events trigger trap messages.
Using the Command Line Interface (CLI), you can designate the minimum severity level
of events to be logged in the Event Log and at which to illuminate the switch’s Fault LED.
Table 32. Event message severity levels
Severity Level Severity Description
1 EMERG Immediate action required; system failing
2 ALERT Unrecoverable condition reported; major event in
progress
3 CRIT Event failed with possible loss of integrity
4 ERR Condition failed; action required
5 WRN Failed event occurred; no action required
6 NOTIFY Configuration error or abnormal event occurred; no
action required
7 INFO Event occurred; no action required
Table 33. Event messages
Event Event Message Severity
1 Message log cleared INFO
5 Power Supply Failed ALERT
6 Power Supply Online NOTIFY
9 Fan has stopped EMERG
10 Fan has returned ALERT
19 Temperatures over limit ALERT
20 Temperature OK INFO
50 SPF Overvoltage EMERG
54 SOC has detected a CRC error in the EEPROM NOTIFY
70 Port # bypassed NOTIFY
71 Port # inserted NOTIFY
72 Transceiver detected at Port # NOTIFY
73 Transceiver removed at Port # NOTIFY
74 SEOC occurred on Port # NOTIFY
75 Port # exceeded OS threshold NOTIFY
76 Port # exceeded CRC threshold NOTIFY
77 Loop UP on Port # NOTIFY
78 Loop DOWN on Port # NOTIFY
79 Port # received a LIP(F8) WRN
80 Port # CRC Error detected in frame WRN
81 Port # did not receive LIPF7) within timeout WRN