IBM TotalStorage L10, Cli Reference Manual

Page: 23 / 96

Chapter 2. Configuration menu (root/config)
11
System configuration menu (root/config/sys)
The System configuration menu provides commands to configure the switch settings.
Menu commands
Setting the system speed (root/config/sys/speed)
This command sets the current speed per port at which the switch is running. All ports
operate at the same speed. The default setting is 2.125 Gb/s.
To change the switch speed:
Type
speed <setting>
and press E
NTER
.
Table 4. System configuration menu commands
Command Description
Additional
Information
1. speed Configures the switch speed. See page 11.
2. mode Configures the switch mode. See page 12.
3. oserr Configures the OS Error Threshold. See page 12.
4. crcerr Configures the CRC Error Threshold. See page 13.
5. blkarb Configures the Blocking Arbitration AL_PA. See page 13.
6. clkd Configures the Clock Delta Threshold. See page 14.
7. time Configures the switch time. See page 14.
8. lipen Configures the Stealth Intelligent Change Manager See page 14.
9. name Configures the switch’s name. See page 15.
10. location Configures the switch’s location. See page 15.
11. contact Configures the contact information for the individual or
party managing the switch. See page 15.
12. syslog Configure the switch for a system log server See page 16.
13. events Displays the event log. See page 18.
14. sev Configures the event log’s severity filter level. See page 18.
15. fault Configures the event log’s severity fault threshold. See page 19.
16. evclr Clears the event log. See page 19.
17. clrled Clears the Fault LED. See page 19.
18. .. Returns to the previous menu. See page 10.
19. ? Displays additional information on a command. See page 10.
Table 5. System speed settings
Setting Description
1 Set switch speed to 1.0625 Gb/s.
2 Set switch speed to 2.125 Gb/s.