IBM TotalStorage L10, Cli Reference Manual

Page: 77 / 96

Chapter 5. Firmware menu (root/fw)
65
6. Type
y
and press E
NTER
.
The following message appears:
7. Type
show
and press E
NTER
.
The active and alternate firmware versions appear.
8. Type
revert
and press E
NTER
to use the alternate firmware image (the new image
that was downloaded) the next time the switch is reset.
9. Type
reset
and press E
NTER
to reboot the switch to activate the new image.
Changing firmware images (root/fw/revert)
This command sets the alternate image to become the active image on the next switch
reset.
To revert to the alternate firmware image:
From the Firmware menu (root/fw), type
revert
and press E
NTER
.
Displaying current firmware information (root/fw/show)
This command displays information for the current active, alternate, and boot firmware
images.
To view the current firmware information:
From the Firmware menu (root/fw), type
show
and press E
NTER
.
Hardware reset (root/fw/reset)
This command resets the switch hardware.
To reset the switch:
1. From the Firmware menu (root/fw), type
reset
and press E
NTER
.
If any changes have been made to the switch configuration, a message appears
confirming the request to save the current configuration.
Figure 6. XMODEM download complete message
Transfer Complete. Verifying file integrity....
Verification Complete. Copying to Flash.............
Flash Copy Complete.
Download Complete.
New image will become active upon reset.
OK
Figure 7. Firmware information display
Internal Firmware Versions:
------------------------------------------------------
ACTIVE: V2.08 (build 2) Jun 2 2004 23:59:32
ALTERNATE: V2.08 (build 1) May 24 2004 03:32:06
BOOT: V1.00 (build 1) May 24 2004 03:32:01