IBM TotalStorage L10, Cli Reference Manual

Page: 70 / 96

2006 Model L10 Storage Switch
58
Displaying zone information (root/show/zninfo)
This command displays zone status (enabled or disabled) and current zone information,
including the zone number, current state, LIM, and Up Count.
To view zone information:
From the Show menu (root/show), type
zninfo
and press E
NTER
.
Displaying Load Balancing information (root/show/lbinfo)
This command displays the current load balancing information, including port number,
port members, and associated AL_PAs.
To view load balancing information:
1. From the Show menu (root/show), type
lbinfo
and press E
NTER
.
A list of ports and their associated port members and AL_PAs appears.
2. Press E
NTER
to continue.
A list of ports and their associated modes and utilization percentages appears.
Fault Status The current status of the switch.
InSpeed SOC Status The current status of the InSpeed SOC chipset.
Current Time The switch’s current date and time.
System Up Time The duration of time that the switch has been operational. If
the switch is rebooted or power is cycled, this value is reset.
IP Address The current IP Address for the switch.
Netmask The current IP Netmask address for the switch.
Default Gateway The current Gateway address for the switch.
Table 29. Load Balancing information
Value Description
Mode (1) timeOpen–When switching mode is enabled, this value
measures the percentage of time that the port is involved in a
connection, regardless of the amount of data that is being
sent.
(2) framesSeen–When switching mode is disabled, this value
measures the amount of frame data passing through the port.
Utilization (%) Displays the utilization percentage for each port based on the
mode.
Table 28. System information (continued)
Setting Description