IBM TotalStorage L10, Cli Reference Manual

Page: 27 / 96

Chapter 2. Configuration menu (root/config)
15
Setting the switch name (root/config/sys/name)
This command sets the switch name. The name is limited to 79 characters and quotation
marks must wrap the entire name. For example, ‘Storage Switch #3’. The default setting
is ‘Storage Switch’.
To change the switch name:
1. From the System Configuration menu (root/config/sys), type
name
and press E
NTER
.
The current name appears in brackets before the command prompt.
2. Type the new name and press E
NTER
.
To view the current switch name:
From the Root menu, type
show sysinfo
and press E
NTER
.
Setting the switch location (root/config/sys/location)
This command sets the switch location. The location is limited to 79 characters and
quotation marks must wrap the entire location. For example, ‘Lab #1’. The default setting
is ‘None’.
To change the switch location:
1. From the System Configuration menu (root/config/sys), type
location
and press
E
NTER
.
The current location appears in brackets before the command prompt.
2. Type the new location and press E
NTER
.
To view the current switch location:
From the Root menu, type
show sysinfo
and press E
NTER
.
Setting the contact information (root/config/sys/contact)
This command sets the switch contact information. Contact information may be a name,
telephone number, or web site address. The contact information is limited to 79
characters and quotation marks must wrap the entire contact information. For example,
‘John Smith 425-555-1212’. The default setting is ‘IBM Technical Support’.
To change the switch contact information:
1. From the System Configuration menu (root/config/sys), type
contact
and press
E
NTER
.
The contact information appears in brackets before the command prompt.
2. Type the new contact information and press E
NTER
.
To view the current switch contact information:
From the Root menu, type
show sysinfo
and press E
NTER
.