IBM TotalStorage IP Storage 200i 110, Installation Manual

Page: 30 / 94

3. Hold the cover against the engine and slide the cover toward the front of the
engine until the cover clicks into place.
1
Slots
2
Left-side cover
Replacing the Model 210 cover: To replace the top cover:
1. Align the top cover with the top of the engine, about 25 mm (1 in.) from the front
of the appliance; the flanges on the left and right sides of the cover should be
on the outside of the engine chassis.
2. Hold the cover against the engine and slide the cover toward the front of the
engine until the cover clicks into place.
1
Flange
2
Top cover
3
Side latches
18
IBM TotalStorage IP Storage 200i Models 110 and 210 Installation Guide