c)
To attach ThinkPad hard disk
drive, do the following:
Insert the ThinkPad hard disk
drive into the 1-inch-high
compartment. Leave enough
space in the back of the device
so the cables can be connected.
Insert the connector
1
of the
flat-ribbon cable into the
connector
2
of the Dock II.
Note
If the flat-ribbon cable is not
long enough to reach the
connector
2
, unlatch the
cable clamp
3
from the
cable connector
1
and
remove the cable clamp to
extend the cable.
While pressing the connected
cables down so that they are not
above the ThinkPad hard disk
drive, push in the drive until it
completely stops and is latched.
Latch
If you need to remove
devices, you must release
the latch. See “Releasing the
Latch” on page 71.
1
1
1
Chapter 4. Installing and Removing IBM Options
49
Title: C78JAMST CreationDate: 05/06/94 19:15:58
All manuals and user guides at all-guides.com