The last EZ-SCSI screen has three buttons:
Click Reboot to restart your computer and activate the newly
installed EZ-SCSI device drivers.
Click Return to Windows to exit EZ-SCSI and keep working in
Windows without restarting your computer. You must restart
your computer later to activate the new configuration.
Click View README to view the information in the readme.txt
file.
When you return to Windows before or after restarting your
computer, you will see the Adaptec SCSI group, which contains icons
for several EZ-SCSI applications and informational files.
Installing EZ-SCSI for DOS
The DOS version of EZ-SCSI gives your computer access to the
Adaptec SCSI device drivers and ASPI managers. It also includes
several formatting utilities and an audio CD-Player application.
Note: Adaptec EZ-SCSI for DOS does not install any Windows
applications, nor does it install ASPI for Windows. If
Microsoft Windows 3.1 or later is installed on your computer,
follow the directions in "Installing EZ-SCSI for Windows."
Dock your computer; then follow these steps to install Adaptec
EZ-SCSI for DOS:
1. Insert the Dock II option diskette into the diskette drive on your
computer.
2. At the DOS prompt, change to the drive letter where you inserted
the diskette (either A or B).
3. Type dosinst and press Enter. A message appears while Adaptec
EZ-SCSI loads into memory.
118
IBM ThinkPad Dock II User's Guide
Title: C78JAMST CreationDate: 05/06/94 19:15:58
All manuals and user guides at all-guides.com
