IBM System Storage DS4000, Hardware Manual

Page: 171 / 566

Chapter 4. IBM System Storage DS planning and configuration
153
Go to the Web page for the System Storage Interoperation Center to get the latest DS5000
storage subsystem compatibility information at the following address:
http://www-01.ibm.com/systems/support/storage/config/ssic/index.jsp
4.7.1 Installing Storage Manager in a Windows Server 2008 host
This section covers a guided installation of the Storage Manager V10.60 software in a
Windows Server 2008 host environment. You can use it as a reference also for installing on
other environments as well.
The host software for Windows includes the following components:
򐂰 SMclient
򐂰 Multipath driver
򐂰 SMagent
򐂰 SMutil
Perform the following steps:
1. Because you are installing new software, including new drivers, you need to log on with
administrator rights.
2. Locate and run the installation executable file, either in the appropriate CD-ROM directory,
or the file that you have downloaded from the IBM support Web site. Once executed,
select your language of choice. After the introduction and copyright statement windows,
you are asked to accept the terms of the license agreement. This is required to proceed
with the installation.
3. The next step is to select the installation target directory. The default installation path is
C:\Program Files\IBM_DS , but you can select another directory.
Note: Before installing your DS5000 storage subsystem hardware and software, be sure to
meet all the requirements for your DS5000 model: HBAs, firmware version, SAN, and OS
level, as specified at the IBM Support Web site.