IBM System Storage DS4000, Hardware Manual

Page: 290 / 566

272
IBM Midrange System Storage Hardware Guide
When the security key has been successfully changed, a confirmation window opens, as
shown in Figure 5-13, where the new key file location and security key identifier are shown.
Figure 5-13 Change Security Key Complete confirmation window
5.4.2 Save security key file
This action will save a backup of the security key file and will require the original pass phrase
in order to copy it. It can therefore also be used to verify that the pass phrase stored is
correct. To save the security key file, select, from the top left hand corner of the Storage
Manager menu, Storage Subsystem

Drive Security

Save Security Key File.