Figures
Port side of the SAN512B-6 (sample
configuration) .
Nonport side of the SAN512B-6 (sample
configuration) .
Left and right shelf brackets installed on rails
Nut and screw locations for mounting the
device .
Positioning the device for installation in a rack 27
Attaching port side of device to rack rails
Attaching the rear tray to the rack rails
Attaching the front tray to the rack rails
Placing the device in the trays .
Attaching trays to the device.
Removing protective cover from SAN512B-6
QSFP transceiver with separate cable .
2 km QSFP 16 Gbps with integrated cable
2 km LWL QSFP transceiver with integrated
cable .
Female-to-female patch cable for QFSP
connections
Optical transceiver extraction tool .
Installing an SFP+ transceiver with pull tab
into blade port
Installing an SFP+ transceiver with bail latch
into blade port
Replacing a SFP+ optical transceiver with pull
tab into blade port .
Installing an SFP+ transceiver with bail latch
into blade port
Installing a QSFP transceiver into blade port
Installing a QSFP optical transceiver into blade
port .
Control processor blade (CPX6) .
CR32-8 core routing blade LEDs
FC32-48 blade port numbering .
SX6 extension blade port numbering
Removing and replacing port or extension
blade .
CR32-8 core routing blade port numbering
ICL cable connections (sample configuration)
Removing and installing a core routing blade 126
CPX6 blade port identification .
Removal and replacement of the control
processor blade (CPX6) .
Removal and replacement of the control
processor blade (CPX6) .
WWN card location and numbering .
Removing and installing WWN cards
Power supply assembly numbering .
HVAC/HVDC power supply assembly
Removing and installing power supply
assembly .
Removing and installing a fan assembly
Removing and installing the blade filler panel 182
Removing and installing the blade filler panel 183
Removing or installing cable management
comb .
Removal and replacement of the chassis door 188
Removing protective cover from SAN512B-6
chassis .
Removal and replacement of the chassis door 190
Attaching the rack to a concrete floor
Attaching the rack to a raised floor .
Attaching the mounting plate .
Power cord cabling (rack side view) .
SAN rack with iPDU locations .
iPDU (PN 00FW787) for director attachment
© Copyright IBM Corp. 2017
vii
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
||
Summary of Contents for SAN512B-6
