IBM SAN512B-6, Installation, Service And User Manual

Page: 46 / 286

Parts list – NEBS kit
The following table lists the parts supplied in the NEBS KIT to help direct airflow
away from the rack area. This kit is only supported for specific devices, and may
not apply to the device that you are installing.
Note: Depending on the device and installation, not all of the parts may be used.
1 - Left rack mount shelf bracket
2 - Right rack mount shelf bracket
3 - 10-32 x 5/8 in. (1.58 cm) panhead Phillips screw and washer
4 - 10-32 clip nut for racks that have rails with round holes
5 - 1/4-20 x 1/2 in. (1.27 cm) panhead Phillips screw with lock washer for racks that have rails with round holes
6 - 10-32 retainer nut for racks that have rails with square holes
7 - 1/4-20 x 1/2 in. (1.27 cm) panhead Phillips screw with thread locker for racks that have rails with square holes
8 - 3/8 in. (0.953 cm) alignment washer for racks that have rails with square holes
Figure 3. Rack kit parts
22
SAN512B-6 Installation, Service, and User Guide
|
|
|
|
|