IBM SAN512B-6, Installation, Service And User Manual

Page: 133 / 286

SX6 blade port numbering and trunking
The following illustration shows how ports are numbered on the blade. Ports are
labeled as 10GE, 40 GbE, and FC on the blade.
1 - 40 GbE port 0
2 - 40 GbE port 1
3 - 10/1 GbE ports 2–9 (bottom to top)
4 - 10/1 GbE ports 10–17 (bottom to top)
5 - FC ports 0, 1, 2, 3, 8, 9, 10, 11 (bottom to top)
6 - FC ports 4, 5. 6, 7, 12, 13, 14, 15 (bottom to top)
Following are the eight-port Fibre Channel port groups for configuring trunk
groups or "trunks":
v Port group 0: ports 0–7
v Port group 1: ports 8–15
Figure 34. SX6 extension blade port numbering
Chapter 7. Port and Extension Blades
109