IBM SAN512B-6, Installation, Service And User Manual

Page: 142 / 286

1 - Map showing ports 6, 7, 14, and 15
2 - Map showing ports 4, 5, 12, and 13
3 - QSFP ports 8-15 (bottom to top)
4 - QSFP ports 0-7 (bottom to top)
5 - Map showing ports 2, 3, 10, 11
6 - Map showing ports 0, 1, 8, 9
QSFP ports are numbered from 0 through 7 on the left side from bottom to top
and 8 through 15 on the right side from bottom to top. For information on
supported QSFP transceivers, refer to “Supported transceivers and cables” on page
57.
Ports belonging to the same trunking groups are indicated with the same color
border under the ports. These colors are also applied to the port map labels on
each blade to indicate ports belonging to the same trunking groups.
Figure 36. CR32-8 core routing blade port numbering
118
SAN512B-6 Installation, Service, and User Guide