Using the Standalone and Online Diagnostics
3-19
Running the System Diagnostics
Since the system is directly attached to the channel of the host system, the communications
between the host system and all of the ESCON channel adapters must be stopped before
diagnostics are run on any ESCON channel adapter. See ”Stopping Communications” for
this adapter for general guidelines, or see the
AIX Version 4.1 Enterprise Systems
Connection Adapter: User’s Guide and Service Information for detailed procedures.
Before disconnecting
any cables from the adapter, the host system ESCON channel must
be stopped. Get the host system operator to do this for you.
The system diagnostics allow wrap testing at the adapter connector. See the
AIX Version
4.1 Enterprise Systems Connection Adapter: User’s Guide and Service Information for
detailed procedures.
Error Log Entries
Both the error log in the Version 3 of the AIX Operating System and the host system error
log may provide valuable information for problem solving.
For a description of the system error logging and the error log entries representing this
adapter, see the following manuals:
•
AIX Version 4.1 Problem Solving Guide and Reference, form number SC23–2606
•
Adapters, Devices, and Cable Information, form number SA23–2764
•
AIX Version 4.1 Enterprise Systems Connection Adapter: User’s Guide and Service
Information, form number SC23–2474.
Solving System to Host System Communication Problems
Use the
AIX Version 4.1 Enterprise Systems Connection Adapter: User’s Guide and Service
Information and the AIX Version 4.1 Problem Solving Guide and Reference to solve
operational problems after initial installation.
For installation problems, use the
AIX Version 4.1 Enterprise Systems Connection Adapter:
User’s Guide and Service Information to be sure the software is installed, the channel is
cabled correctly, and the host system and operating system are configured correctly.
If there is a fiber cable problem, consult
Maintenance Information for Enterprise System
Connection Links, SY27–2597.
Cabling the System Unit to the Host System
Refer to
Adapters, Devices, and Cable Information, form number SA23–2764 for cabling
information.
