IBM pSeries 615 Model 6C3 User Manual Download | Manualshive

Page: 126 / 208

background image

Display System Environmental Sensors

This service aid displays the environmental sensor information for the system. The information displayed is
the sensor name, physical location code, literal value of the sensor status, and the literal value of the
sensor reading.

The sensor status can be any one of the following:

v

Normal

- The sensor reading is within the normal operating range.

v

Critical High

- The sensor reading indicates a serious problem with the device. Run diagnostics on

sysplanar0 to determine what repair action is needed.

v

Critical Low

- The sensor reading indicates a serious problem with the device. Run diagnostics on

sysplanar0 to determine what repair action is needed.

v

Warning High

- The sensor reading indicates a problem with the device. This could become a critical

problem if action is not taken. Run diagnostics on sysplanar0 to determine what repair action is needed.

v

Warning Low

- The sensor reading indicates a problem with the device. This could become a critical

problem if action is not taken. Run diagnostics on sysplanar0 to determine what repair action is needed.

v

Hardware Error

- The sensor could not be read because of a hardware error. Run diagnostics on

sysplanar0 in problem-determination mode to determine what repair action is needed.

v

Hardware Busy

- The system has repeatedly returned a busy indication, and a reading is not available.

Try the service aid again. If the problem continues, run diagnostics on sysplanar0 in
problem-determination mode to determine what repair action is needed.

This service aid can also be run as a command. You can use the command to list the sensors and their
values in a text format, list the sensors and their values in numerical format, or a specific sensor can be
queried to return either the sensor status or sensor value.

Run the command by entering one of the following:

/usr/lpp/diagnostics/bin/uesensor -l | -a

/usr/lpp/diagnostics/bin/uesensor -t

token

-i

index

[-v]

Flag

Description

-l

List the sensors and their values in a text format.

-a

List the sensors and their values in a numerical format. For each sensor, the numerical
values are displayed as:

token index status measured value location code

-t

token

Specifies the sensor token to query.

-i

index

Specifies the sensor index to query.

-v

Indicates to return the sensor measured value. The sensor status is returned by default.

Examples

The following are examples from this command:

1. Display a list of the environmental sensors:

/usr/lpp/diagnostics/bin/uesensor -l

Sensor = Fan Speed
Status = Normal
Value = 2436 RPM
Location Code = F1
Sensor = Power Supply
Status = Normal
Value = Present and operational
Location Code = V1
Sensor = Power Supply
Status = Critical low
Value = Present and not operational
Location Code = V2

2. Display a list of the environmental sensors in a numerical list:

/usr/lpp/diagnostics/bin/uesensor -a

106

pSeries 610 Model 6C3 and Model 6E3 User’s Guide

«
...
124
125
126
127
128
...
»

Summary of Contents for pSeries 615 Model 6C3

















































































































































































































Reviews:

No comments

Related manuals for pSeries 615 Model 6C3

Brand: D-Link Pages: 12

Brand: Acano Pages: 17

NovaScale T820 F2

Brand: Bull Pages: 34

Express5800/R120h-1E

Brand: NEC Pages: 52

Brand: Lantech Pages: 49

Brand: B&B Pages: 70

Brand: X-media Pages: 10

8676 - Eserver xSeries 335

Brand: IBM Pages: 172

TS-U100 - NAS Server - USB

Brand: TRENDnet Pages: 47

x3350 - System - 4192

Brand: IBM Pages: 98

x3500 - System - 7977

Brand: IBM Pages: 124

Brand: IBM Pages: 106

x3200 - System M3 - 7328

Brand: IBM Pages: 100

System x3400 Type 7975

Brand: IBM Pages: 124

System x3300 M4

Brand: IBM Pages: 470

System x iDataPlex dx360

Brand: IBM Pages: 26

Palcare PAL-211401

Brand: PalatiumCare Pages: 64

Brand: Lenovo Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands