manualshive.com logo in svg

IBM pSeries 615 Model 6C3, User Manual

The IBM pSeries 615 Model 6C3 is a powerful and reliable server designed to meet the demands of modern businesses. To help you make the most of its capabilities, we provide a comprehensive User Manual that you can download for free from manualshive.com. Explore and optimize your experience today!

Share
Download
background image

The Standalone Diagnostic Package Configuration Diskette allows the following to be changed from the
console:

v

Default refresh rate for a low function terminal (LFT)

The refresh rate used by the standalone diagnostic package is 60 Hz. If the display’s refresh rate is 77
Hz, set the refresh rate to 77.

v

Different async terminal console

You can create a console configuration file that allows a terminal attached to any RS232 or RS422
adapter to be selected as a console device. The default device is an RS232 TTY device attached to the
first standard serial port (S1).

Delete Resource from Resource List

Use this task to delete resources from the resource list.

Note:

Only resources that were previously detected by the diagnostics and have not been deleted from
the Diagnostic Test List are listed. If no resources are available to be deleted, then none are listed.

Disk Maintenance

This service aid provides the following options for the fixed-disk maintenance:

v

Disk to Disk Copy

v

Display/Alter Sector

Disk to Disk Copy

Notes:

1. This service aid cannot be used to update to a different size drive. The service aid only supports

copying from a SCSI drive to another SCSI drive of similar size.

2. Use the

migratepv

command when copying the contents to other disk drive types. This command also

works when copying SCSI disk drives or when copying to a different size SCSI disk drive. Refer to

System Management Guide: Operating System and Devices

for a procedure on migrating the contents

of a physical volume.

This publication is located on the

AIX Documentation

CD. The documentation information is made

accessible by loading the documentation CD onto the hard disk or by mounting the CD in the CD-ROM
drive.

This selection allows you to recover data from an old drive when replacing it with a new drive. The service
aid recovers all logical volume manager (LVM) software reassigned blocks. To prevent corrupted data from
being copied to the new drive, the service aid stops if an unrecoverable read error is detected. To help
prevent possible problems with the new drive, the service aid stops if the number of bad blocks being
reassigned reaches a threshold.

To use this service aid, both the old and new disks must be installed in or attached to the system with
unique SCSI addresses. This requires that the new disk drive SCSI address must be set to an address
that is not currently in use and the drive be installed in an empty location. If there are no empty locations,
then one of the other drives must be removed. When the copy is complete, only one drive can remain
installed. Either remove the target drive to return to the original configuration, or perform the following
procedure to complete the replacement of the old drive with the new drive:
1. Remove both drives.
2. Set the SCSI address of the new drive to the SCSI address of the old drive.
3. Install the new drive in the old drive’s location.
4. Install any other drives (that were removed) into their original location.

Chapter 7. Introducing Tasks and Service Aids

101

Summary of Contents for pSeries 615 Model 6C3

















































































































































































































Reviews:

No comments

Related manuals for pSeries 615 Model 6C3

AIC CB201-Z1 User Manual preview
CB201-Z1
Brand: AIC Pages: 52
U.S. Converters XS1000 User Manual preview
XS1000
Brand: U.S. Converters Pages: 5
IBM HS21 XM BLADECENTER - L5408 FOR SPEC CPU2006 Supplementary Manual preview
HS21 XM BLADECENTER - L5408 FOR SPEC CPU2006
Brand: IBM Pages: 1
BlueBroadcaster iSENDER User Manual preview
iSENDER
Brand: BlueBroadcaster Pages: 21
NETGEAR ReadyNAS 3220 Series Datasheet preview
ReadyNAS 3220 Series
Brand: NETGEAR Pages: 4
RackSolutions 4Post Installation Instructions Manual preview
4Post
Brand: RackSolutions Pages: 8
IBM Netfinity 4500R Installation Manual preview
Netfinity 4500R
Brand: IBM Pages: 60
D-Link DPR-2000 Quick Installation Manual preview
DPR-2000
Brand: D-Link Pages: 40
Fujitsu PRIMERGY RX200 S6 Options Manual preview
PRIMERGY RX200 S6
Brand: Fujitsu Pages: 84
IBM xSeries 206 User Manual preview
xSeries 206
Brand: IBM Pages: 58
IBM System x3500 M4 Installation And User Manual preview
System x3500 M4
Brand: IBM Pages: 170
Viavi G4-ObserverONE Manual preview
G4-ObserverONE
Brand: Viavi Pages: 11
Kramer KN-DSP100 User Manual preview
KN-DSP100
Brand: Kramer Pages: 28
TRENDnet TEW-PS3 Specifications preview
TEW-PS3
Brand: TRENDnet Pages: 2
TRENDnet TW100-P1W1 Specifications preview
TW100-P1W1
Brand: TRENDnet Pages: 2
TRENDnet TEW-PS3 Hardware User'S Manual preview
TEW-PS3
Brand: TRENDnet Pages: 25
Octagon TRAX-10 Technical Manual preview
TRAX-10
Brand: Octagon Pages: 17
Red Hat NETWORK PROXY SERVER 4.0 - Installation Manual preview
NETWORK PROXY SERVER 4.0 -
Brand: Red Hat Pages: 44

Brands by name

Popular brands

Load more brands