IBM pSeries 615 Model 6C3, User Manual

Page: 12 / 208

Electrical Safety
Observe the following safety instructions any time you are connecting or disconnecting devices attached to
the workstation.
When using or servicing your system keep the following in mind:
v The ac power interface connector is considered the main power disconnect device.
v
This system has redundant power supply capabilities, meaning that it has the capability of having two
power supplies running simultaneously in the same system unit. When instructed to disconnect the
power source, ensure that all power cables have been unplugged.
DANGER
An electrical outlet that is not correctly wired could place hazardous voltage on metal parts of
the system or the devices that attach to the system. It is the responsibility of the customer to
ensure that the outlet is correctly wired and grounded to prevent an electrical shock.
Before installing or removing signal cables, ensure that the power cables for the system unit
and all attached devices are unplugged.
When adding or removing any additional devices to or from the system, ensure that the power
cables for those devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
Use one hand, when possible, to connect or disconnect signal cables to prevent a possible
shock from touching two surfaces with different electrical potentials.
During an electrical storm, do not connect cables for display stations, printers, telephones, or
station protectors for communications lines.
D05
CAUTION:
This product is equipped with a three-wire power cable and plug for the user’s safety. Use this
power cable with a properly grounded electrical outlet to avoid electrical shock.
C01
DANGER
To prevent electrical shock hazard, disconnect all power cables from the electrical outlet before
relocating the system.
D01
x
pSeries 610 Model 6C3 and Model 6E3 User’s Guide