manualshive.com logo in svg

IBM Power Systems Series, Problem Analysis, System Parts, And Locations

Share
Download
IBM Power Systems Series Problem Analysis, System Parts, And Locations Download Page 94

Figure 11. Drive on module (DOM) locations

The following table provides the drive on module (DOM) locations.

Table 30. Drive on module (DOM) locations
Index number

FRU description

FRU removal and replacement

procedures

42

Drive on module (DOM) 1

See Removing and replacing a

storage drive in the 9006-12P.

43

Drive on module (DOM) 2

See Removing and replacing a

storage drive in the 9006-12P.

9006-12P parts

Use this information to find the field-replaceable unit (FRU) part number.
After you identify the part number of the part that you want to order, go to Advanced Part Exchange

Warranty Service. Registration is required. If you are not able to identify the part number, go to Contacting

IBM service and support.

80  Power Systems: Problem analysis, system parts, and locations for the 5104-22C, 9006-12P, 9006-22C, and

9006-22P

Summary of Contents for Power Systems Series







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands