manualshive.com logo in svg

IBM Power Systems Series, Problem Analysis, System Parts, And Locations

Share
Download
IBM Power Systems Series Problem Analysis, System Parts, And Locations Download Page 45

Table 10. Sensor information, event description, and service action for the 5104-22C, 9006-12P,

9006-22C, or 9006-22P (continued)
Sensor name (Sensor ID)

Event description

Service action

• P1-DIMMA1 Func (0x10)
• P1-DIMMA2 Func (0x11)
• P1-DIMMB1 Func (0x12)
• P1-DIMMB2 Func (0x13)
• P1-DIMMC1 Func (0x14)
• P1-DIMMC2 Func (0x15)
• P1-DIMMD1 Func (0x16)
• P1-DIMMD2 Func (0x17)
• P2-DIMMA1 Func (0x18)
• P2-DIMMA2 Func (0x19)
• P2-DIMMB1 Func (0x1A)
• P2-DIMMB2 Func (0x1B)
• P2-DIMMC1 Func (0x1C)
• P2-DIMMC2 Func (0x1D)
• P2-DIMMD1 Func (0x1E)
• P2-DIMMD2 Func (0x1F)

Configuration Error

Complete the following steps:

a. If the sensor name is P1-

DIMMA1 Func, ensure that

P1-DIMMA1 is seated

properly. If the sensor name

is P1-DIMMA2 Func, ensure

that P1-DIMMA2 is seated

properly. And so on.

b. If you recently installed or

replaced memory DIMMs,

ensure that the DIMMs are

plugged in the correct

memory slots.

c. If the sensor name is P1-

DIMMA1 Func, replace P1-

DIMMA1. If the sensor name

is P1-DIMMA2 Func, replace

P1-DIMMA2. And so on. Go to

“5104-22C or 9006-22C

locations” on page 63,

“9006-12P locations” on page

75, or “9006-22P locations”

on page 91 to identify the

physical location and removal

and replacement procedure.

Beginning troubleshooting and problem analysis  31

Summary of Contents for Power Systems Series







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands