manualshive.com logo in svg

IBM Power Systems Series, Problem Analysis, System Parts, And Locations

Share
Download
IBM Power Systems Series Problem Analysis, System Parts, And Locations Download Page 53

Table 10. Sensor information, event description, and service action for the 5104-22C, 9006-12P,

9006-22C, or 9006-22P (continued)
Sensor name (Sensor ID)

Event description

Service action

• Freq Limit Pwr 1 (0x69)
• Freq Limit Pwr 2 (0x6D)

Performance Met

If Asserted is in the event

description, no service action is

required.
If Deasserted is in the event

description, ensure that both

power supplies are working

properly. Search for serviceable

events related to system power

and voltage and resolve them.

Ensure all fans are working

properly by looking for

serviceable events related to fans

and resolving them.

Performance Lags

If Deasserted is in the event

description, no service action is

required.
If Asserted is in the event

description, ensure that both

power supplies are working

properly. Search for serviceable

events related to system power

and voltage and resolve them.

Ensure all fans are working

properly by looking for

serviceable events related to fans

and resolving them.

Beginning troubleshooting and problem analysis  39

Summary of Contents for Power Systems Series







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands