IBM NetVista, Hardware Maintenance Manual

Page: 76 / 155

76
004 -
Perform the following under Windows Millennium.
NOTE:
If an operating system other than Microsoft Windows Millennium is installed, the program screens and icons
may differ from these instructions.
1. Start Microsoft Windows Millennium.
2. Select the
Start
icon.
3. Select
Settings
, then select
Control Panel
.
4. Select the
Sound
icon.
5. In the Sound window, select
chimes
from the
Names
field. (To test other adapter card software, select an action
from a menu in that software.)
005 - IS THE PREVIEW BUTTON, OR ACTION IN OTHER SOFTWARE, SELECTABLE ON THE SCREEN (SHOWN IN
BLACK AND NOT GRAY)? (YES, GO TO STEP 006. NO, READ AHEAD.)
Make sure that Windows Millennium is properly installed.
Go to step 001.
006 -
Select the
Preview
button from the Sound window.
007 - DO YOU HEAR ANY SOUND FROM THE SPEAKER? (YES, READ AHEAD. NO, GO TO STEP 008.)
The audio feature is functioning normally. Click
Cancel
to close the dialog box. Exit Microsoft Windows Millennium.
If the symptom remains or has changed, go to “Index of Symptoms, Messages, Error Codes, or Beeps” on page 60.
End.
008 -
Make sure that the volume control is not turned low.
Make sure that the speaker and its adapter are not damaged.
Make sure that the speaker is plugged into speak-out jack. Refer to the “Connectors and Functions for the System
Board of Machine Types 2255 and 2275” on page 121.
If the error cannot be resolved, replace the system board.
End.
CD-ROM Drive
001 - START
Insert the diagnostics diskette into the diskette drive and make sure that there is no CD in the CD-ROM drive.
Select
Interactive Tests
menu, then select and execute
CD-ROM Test
.
002 - DO YOU SEE A MESSAGE “NO CD-ROM DRIVE OR MSCDEX DEVICE DRIVER INSTALLED.”? (YES, READ
AHEAD. NO, GO TO STEP 003.)
Exit the diagnostics program and power off the system.
Check and make sure that the CD-ROM drive power cable and audio and data cables are not damaged and are
connected properly.
Check and make sure that the CD-ROM drive driver is loaded correctly.
Load default settings.