57
Make sure that the monitor refresh rate is correct.
Note any symptoms, messages, error codes, or beeps.
Make sure that there are no diskettes or CDs in the drives.
002 -
DOES AN IBM LOGO SCREEN APPEAR? (YES, READ AHEAD. NO, GO TO STEP 004.)
Insert the diagnostics diskette in the diskette drive.
003 - DOES SYSTEM LOAD THE DIAGNOSTICS PROGRAM FROM THE DISKETTE DRIVE? (YES, READ AHEAD.
NO, GO TO STEP 004.)
Follow the instructions on the screen and select
Utility
from the diagnostics program menu.
Select
Tech Support Form
from the menu, press F5 to execute, then generate a system configuration report.
Compare the system configuration list with the actual devices installed in system.
NOTE:
If necessary, remove the machine cover and visually compare the devices installed in system to those shown
in the system configuration report.
Go to step 006.
004 - DO ANY MESSAGES, ERROR CODES, OR SYMPTOMS APPEAR? (YES, READ AHEAD. NO, GO TO STEP
005)
Go to “Index of Symptoms, Messages, Error Codes, or Beeps” on page 60.
End.
Summary of Contents for NetVista
