IBM NetVista, Hardware Maintenance Manual

Page: 37 / 155

37
•
One 4-pin (2-wire) cable for hard disk drive light-emitting diode (LED) and (3-wire) cable for power light-emitting diode
(LED).
•
One 2-pin (2-wire) cable for power switch.
•
One 4-pin (3-wire) cable for CD-ROM audio-in.
•
One 20-pin ribbon cable for daughter board bezel supports USB, S/PDIF, Volume Control, Head Phone jack, and
Microphone jack (or USB, USB, S/PDIF, Volume Control, Head Phone jack, and Microphone jack). (On some models
only)
•
One 4-pin (3-wire) cable for passive speaker.
•
One cable for S/PDIF and speaker out. (On some models only)
•
Dual USB cable
•
One 40-pin ribbon cable for PCMCIA. (On some models only)
•
One 6-pin (6-wire) cable connected to IEEE 1394 PCI adapter card for IEEE 1394 port in front panel. (On some models
only)
Modem
•
56Kbps PCI Plug and Play modem adapter card with data/fax features.
•
Telephone line-out (RJ-11) connector.
•
Telephone line-in (RJ-11) connector.
IBM Monitor
•
Super video graphics array (SVGA) monitor.
•
Compliant to VESA power saving mode.
•
Connector for a detachable grounded 3-wire power cord.
•
1.8-m (5.8-ft) attached signal cable.
•
Auto-sensing power input for 100 V ac to 240 V ac.
Keyboard
•
USB RAK3e, w/o Hub, w/Palm Rest, Stealth Black IBM Keyboard. Keyboard is Geography/Model dependent.
Mouse
•
PS/2 mouse (some models), standard 2-button mouse (some models) connected to the mouse port with 1.8-m (5.8-ft)
cable.