IBM NetVista, Hardware Maintenance Manual

Page: 127 / 155

127
CD-ROM Drive
CD-ROM Front Panel
NOTE:
Position of CD-ROM switches and LEDs may vary from illustration.
Item Description
1 Load / eject button
2 Headphone jack (Some optical drive will not have this jack.)
3 Power-on / busy indicator, lights up in green color while disc is set in ready state; lights up and flashes in
amber color during data read or seek operation.
4 Headphone volume control
5 Emergency eject hole.
See CD-ROM Emergency-exit below.
CD-ROM Emergency-exit
NOTE:
Make sure to turn off the power before manual disc eject operation.
If for any reason the tray does not eject
automatically, insert and press an
eject-bar inside the emergency eject
hole to manually eject the tray. A
straightened paper clip with a diameter
of 1.2 mm (typical) can be used as an
eject-bar.
15mm Typical