manualshive.com logo in svg

IBM N Series, Hardware Manual

The Nokia N Series is a cutting-edge mobile phone series that encompasses advanced features and functionalities. To ensure seamless usage, a comprehensive User Manual is provided with each device, offering detailed instructions and insights. Download your free User Manual for Nokia N Series from manualshive.com and make the most of your device.

Share
Download
background image

© Copyright IBM Corp. 2012, 2014. All rights reserved.

237

Chapter 18.

Boot from SAN

Storage area network (SAN) boot is a technique that allows servers to use an operating 
system (OS) image that is installed on external SAN-based storage to boot. The term 

SAN 

booting

 means the use of a SAN-attached disk, such as a logical unit number (LUN), as a 

boot device for a SAN host.

Fibre Channel SAN booting does not require support for special SCSI operations. It is no 
different from any other SCSI disk operation. The host bus adapter (HBA) communicates with 
the system BIOS, which enables the host to boot from a LUN on the storage system.

This chapter describes the process to set up a Fibre Channel Protocol (FCP) SAN boot for 
your server. This process uses a LUN from an FCP SAN-attached N series storage system. It 
explains the concept of SAN boot and general prerequisites for using this technique. 
Implementations on the following operating systems are described:

򐂰

Windows 2003 Enterprise for System x Servers

򐂰

Windows 2008 Enterprise Server for System x Servers

򐂰

System x Servers with Red Hat Enterprise Linux 5.2

This chapter includes the following sections:

򐂰

Overview

򐂰

Configuring SAN boot for IBM System x servers

򐂰

Boot from SAN and other protocols

18

Summary of Contents for N Series

















































































































































































































































































































































































Reviews:

No comments

Related manuals for N Series

Eaton EMP Quick Start preview
EMP
Brand: Eaton Pages: 2
IBM TS7650G PROTECTIER DEDUPLICATION GATEWAY Overview preview
TS7650G PROTECTIER DEDUPLICATION GATEWAY
Brand: IBM Pages: 11
Laird Sentrius RG1 Series Quick Start Manual preview
Sentrius RG1 Series
Brand: Laird Pages: 27
Nomadix NWCG User Manual preview
NWCG
Brand: Nomadix Pages: 204
Yacht Devices YDOG-01 User Manual preview
YDOG-01
Brand: Yacht Devices Pages: 32
SNR SNR-VG-60 0 Series User Manual preview
SNR-VG-60 0 Series
Brand: SNR Pages: 25
Planet VIP-281GS User Manual preview
VIP-281GS
Brand: Planet Pages: 57
hilscher NIOT-E-TPI51-EN-RE User Manual preview
NIOT-E-TPI51-EN-RE
Brand: hilscher Pages: 258
Patton SmartNode 5540E Series User Manual preview
SmartNode 5540E Series
Brand: Patton Pages: 77
Innovaphone IP0010 Product Catalogue preview
IP0010
Brand: Innovaphone Pages: 24
Kaon CG2200 Quick Setup Manual preview
CG2200
Brand: Kaon Pages: 12
2Wire HomePortal 3801HGV User Manual preview
HomePortal 3801HGV
Brand: 2Wire Pages: 128
QEI ePAQ-9400 User Manual preview
ePAQ-9400
Brand: QEI Pages: 43
QEI ePAQ-9410 User Manual preview
ePAQ-9410
Brand: QEI Pages: 48
QEI DIO-9110 User Manual preview
DIO-9110
Brand: QEI Pages: 45
Xtream CM4642342-MM Quick Start Manual preview
CM4642342-MM
Brand: Xtream Pages: 9
Broadxent BritePort 8120 User Manual preview
BritePort 8120
Brand: Broadxent Pages: 104
Vbox Communications XTi 4134 Full User Manual preview
XTi 4134
Brand: Vbox Communications Pages: 88

Brands by name

Popular brands

Load more brands