manualshive.com logo in svg

IBM Multiprise 3000, Reference Manual, Page: 239 / 264

Share
Download
IBM Multiprise 3000 Reference Manual Download Page 239

 

 

 

 Appendix C. Warranties

Statement of Limited Warranty

The warranties provided by IBM in this Statement of Limited Warranty apply only to
Machines you originally purchase for your use, and not for resale, from IBM or an
IBM authorized reseller. The term “Machine” means an IBM machine, its features,
conversions, upgrades, elements, or accessories, or any combination of them.
Machines are subject to these terms only if purchased in the United States or
Puerto Rico, or Canada, and located in the country of purchase. If you have any
questions, contact IBM or your reseller.

Machine:

S/390 Multiprise 3000 Enterprise Server

Warranty Period*:

One Year

*Elements and accessories are warranted for three months. Contact your place of purchase for
warranty service information.

A one year warranty option is available. Business Partners and/or Sales Specialists should contact
their special bids pricer for details.

 Production Status

Each Machine is manufactured from new parts, or new and serviceable used parts
(which perform like new parts). In some cases, the Machine may not be new and
may have been previously installed. Regardless of the Machine's production
status, IBM's warranty terms apply.

The IBM Warranty

IBM warrants that each Machine 1) is free from defects in materials and
workmanship and 2) conforms to IBM's Official Published Specifications. IBM
calculates the expiration of the warranty period from the Machine's Date of
Installation. The date on your receipt is the Date of Installation, unless IBM or your
reseller informs you otherwise.

During the warranty period, IBM or your reseller will provide warranty service under
the type of service designated for the Machine and will manage and install
engineering changes that apply to the Machine. IBM or your reseller will specify
the type of service.

For a feature, conversion, or upgrade, IBM or your reseller may require that the
Machine on which it is installed be 1) the designated, serial-numbered Machine and
2) at an engineering-change level compatible with the feature, conversion, or
upgrade. Some of these transactions (called “Net-Priced” transactions) may include
additional parts and associated replacement parts that are provided on an
exchange basis. All removed parts become the property of IBM and must be
returned to IBM.

 Copyright IBM Corp. 1999 

 

C-1

Summary of Contents for Multiprise 3000









































































































































































































































































Reviews:

No comments