manualshive.com logo in svg

IBM Multiprise 3000, Reference Manual, Page: 218 / 264

Share
Download
IBM Multiprise 3000 Reference Manual Download Page 218

 

 

 

d. Continue the operation with the following CCW chain:

3. If the interrupted CCW was a Locate Record command:

a. Determine if the seek address is in the user’s extents. If no seek address

exists, do Action 2.

b. Continue the operation with the following CCW chain:

4. This is either a multitrack CCW or the domain of a Locate Record or Locate

Record Extended has gone beyond the current extent.

a. Increment the seek address in sense bytes 5 and 6 by one.
b. If the incremented seek address is still in the current user’s extent, go to

step 4c. Otherwise, determine the seek address by locating the next
extent. If no seek address exists, do Action 2.

c. If a Define Extent command was performed, go to step 4e. Otherwise,

continue with step 4d.

d. Continue the operation with the following CCW chain:

Note:  

If the modified seek argument is not in the user’s extent, the correct
seek argument within another user’s extent must be constructed
before doing a seek. If that is not possible, then Action 2 is
required.

e. Continue the operation with the following CCW chain:

Seek

Argument from step 2a 

Set File
Mask

Same as original

TIC

The first non-TIC CCW following the interrupted CCW.

Seek

Argument from step 2a on page  7-3 

Define
Extent

The user’s new extent is compatible with the seek argument from step
2a on page 7-3. The other parameters are the same as the original
parameters.

TIC

The first non-TIC CCW following the interrupted CCW.

Define
Extent

The user’s new extent is compatible with the seek argument; the other
parameters are the same as the original parameters.

TIC

To the interrupted CCW.

Seek

Argument from steps 4a and 4b 

Set File Mask

Same as original

Set Sector

Argument 0

Read Home
Address

Skip bit on

TIC

To the interrupted CCW.

7-4

Internal Disk Subsystem Reference Guide 

 

Summary of Contents for Multiprise 3000









































































































































































































































































Reviews:

No comments