IBM MTM 2145-12F, Hardware Installation Manual

Page: 185 / 214

Chapter 5. Initializing the SAN Volume Controller 2145-SV1
system
To begin the initialization process for the system, you access the initialization GUI.
You need to know the default user name and password.
Next, you initialize the system by using the technician port.
After you create the system, you must configure it.
Checking your web browser settings for the initialization GUI
To access the initialization GUI, you must ensure that your web browser is
supported and that the appropriate settings are enabled.
Before you begin
The GUI supports the following web browsers:
v Mozilla Firefox 49
v Mozilla Firefox Extended Support Release (ESR) 45
v Microsoft Internet Explorer (IE) 11 and Microsoft Edge
v Google Chrome 54
IBM supports higher versions of the browsers if the vendors do not remove or
disable function that the product relies upon. For browser levels higher than the
versions that are certified with the product, customer support accepts usage-related
and defect-related service requests. If the support center cannot re-create the issue,
support might request the client to re-create the problem on a certified browser
version. Defects are not accepted for cosmetic differences between browsers or
browser versions that do not affect the functional behavior of the product. If a
problem is identified in the product, defects are accepted. If a problem is identified
with the browser, IBM might investigate potential solutions or work-arounds that
the client can implement until a permanent solution becomes available.
Procedure
To configure your web browser, follow these steps:
1. Enable JavaScript for your web browser.
For Mozilla Firefox, JavaScript is enabled by default and requires no additional
configuration.
For Microsoft Internet Explorer (IE) 11 and Microsoft Edge running on
Microsoft Windows 10, JavaScript is enabled by default and requires no
additional configuration.
For Microsoft Internet Explorer (IE) running on Microsoft Windows 7:
a. In Internet Explorer, click Tools > Internet Options.
b.
Click Security Settings.
c. Click Internet to choose the Internet zone.
d.
Click Custom Level.
© Copyright IBM Corp. 2014, 2017
151