IBM L5X, Installation And User Manual

Page: 57 / 120

1. Put the drive in Maintenance mode. For instructions, see “Entering
Maintenance mode” on page 25.
2.
Press the Unload button once per second until either
P
or
U
appears in the
SCD.
P
or
U
will appear in the SCD to indicate the current setting for post
error reporting. If you cycle past the desired code, press the Unload button
once per second until the code reappears.
3. Exit Maintenance mode if you do not want to change the current setting for
post error reporting. For instructions, see “Exiting Maintenance mode” on page
25.
4. To disable post error reporting, press and hold the Unload button for 3 seconds
while
P
appears in the SCD. The SCD changes to
U
after you release the
Unload button.
5.
Press the Unload button once per second to select another Maintenance mode
function. To exit Maintenance mode, see “Exiting Maintenance mode” on page
25.
Chapter 3. Operating
39