IBM L40 SX Quick Reference Download

Page: 99 / 120

Appendix A. Additional Information

IBM Cassette BASIC

IBM Cassette BASIC (Beginner's All-Purpose Symbolic Instruction
Code) is built into the Model L40 SX to help maintain software
compatibility with other

IBM

computers. Cassette BASIC is the

lowest version of BASIC and is not intended for production use
because no information can be saved. For more information about
BASIC, refer to the

IBM BASIC

manual (not included with this

product).

Note:

If your computer has a fixed disk drive with an operating

system already installed, you will not be able to start Cassette
BASIC.

To start Cassette BASIC:

1. Remove the diskette from the diskette drive.

2. Turn on the computer.

3. When the F1 and Diskette Prompts appear, press F1.

4. When the following screen appears, Cassette BASIC is loaded

and ready to use:

Summary of Contents for L40 SX
























































































































Search results

Summary of Contents for L40 SX

Reviews:

Related manuals for L40 SX

Brands by name

Popular brands

IBM L40 SX, Quick Reference

Search results

Summary of Contents for L40 SX

Reviews:

Related manuals for L40 SX

Brands by name

Popular brands