IBM L40 SX Quick Reference Download

Page: 109 / 120

Appendix C. Installing the EMS Memory Manager

[

/Fulldisplay

]: Specifies that the EMS memory manager display

information about the EMS configuration after its sign-on.

[

/Showoptions

]: Specifies that the EMS memory manager show its

command line options after its sign-on.

Defining the EMS Memory Size:

The amount of memory that is

available for the EMS memory is determined by the system BIOS. In
general, the system BIOS SETUP program allows you to set the
amount of memory to be used as the EMS memory. The memory
manager uses:

• Any memory not configured as extended memory, or
• System memory as the EMS memory.

Memory Manager Error Messages:

This section provides explanations of error messages issued by the
EMS memory manager.

- Context depth must be between 1 and 32 -

Explanation:

An invalid number of contexts was specified. The

number specified cannot be 0 and must not be greater than 32. See
page 96 for the Contexts parameter.

- Expected equal after parameter -

Explanation:

One of the parameters on the command line expected

an equal symbol (=) after the parameter, but none was found.

- Internal error In hardware Interface -

Explanation:

A general hardware error was detected.

- Invalid exclusion specified -

Explanation:

The Exclude parameter was specified incorrectly. See

page 96 for the Exclude parameter.

- Invalid inclusion specified -

Explanation:

The Include parameter was specified incorrectly. See

page 96 for the Include parameter.

Summary of Contents for L40 SX
























































































































Search results

Summary of Contents for L40 SX

Reviews:

Related manuals for L40 SX

Brands by name

Popular brands

IBM L40 SX, Quick Reference

Search results

Summary of Contents for L40 SX

Reviews:

Related manuals for L40 SX

Brands by name

Popular brands