IBM L40 SX Quick Reference Download Page 82

Page: 82 / 120

Solving Computer Problems

Troubleshooting Charts

Display Problems

Problem

Action

Blank screen plus no
beeps.

Note:

If you are not sure

about the beeps, turn
the computer off, then
on again. If no beep
sounds, the speaker
icon is not displayed.

Check to see if:

1.The charged rechargeable battery is correctly installed.

2.The AC adapter is connected to the computer and the

power cord is plugged into a working electrical outlet (see
page 38 on how to use the AC adapter).

3.The power switch is on.

4.The Math Coprocessor just installed is installed correctly.

If the above items are correct and the screen still remains
blank, have the system serviced.

Blank screen plus one
beep.

Note:

Any beep is

always accompanied by
a display of the speaker
icon.

Check to see if:

1.Both brightness and contrast controls on the LCD display

are properly adjusted when an external PS/2 display is not
attached.

2.An external PS/2 display is turned on and the brightness

and contrast controls are turned up. When an PS/2 display
is attached. the LCD remains blank.

If the above items are correct and the screen remains blank,
have the system serviced.

Blank screen plus two
or more beeps.

Note:

Any beep is

always accompanied by
a display of the speaker
icon.

If the Dew point (humidity) icon or the Temperature icon
does not turn on, have the system serviced.

Only the cursor
appears.

Have the system serviced.

Screen Is unreadable
or distorted.

Have the system serviced.

Wrong characters
appear on the screen.

Have the system serviced.

Summary of Contents for L40 SX
























































































































Search results

Summary of Contents for L40 SX

Reviews:

Brands by name

Popular brands

IBM L40 SX, Quick Reference

Search results

Summary of Contents for L40 SX

Reviews:

Brands by name

Popular brands