IBM IntelliStation Z Pro 6223, User Manual, Page: 97 / 134

Code Function Result Text message Action
011 Serial port Integrated serial port
1. Make sure that the
loopback plug is
correctly connected
to the external serial
port.
2. Make sure that the
cable from the
external serial port is
correctly connected
to the system board.
3. Call for service.
014 Parallel port Integrated parallel port
1. Make sure that the
loopback plug is
connected correctly
to the external
parallel port.
2. Call for service.
015 USB interface Aborted Can NOT test USB interface while it is in use.
Note: If you have USB devices attached, you
cannot run the diagnostic program for the USB
interface.
1. Turn off the
computer.
2. Replace the all USB
devices with standard
devices.
3. Turn on the
computer.
4. Run the diagnostic
test again.
Failed Any failure message Call for service.
020 PCI interface Failed System board Call for service.
030 SCSI interface Failed SCSI adapter in slot n failed register/counter/
power test
(where n is the slot number of the failing adapter)
See the information that
comes with the adapter
for instructions.
If the problem remains,
call for service.
089 Microprocessor
test
Failed Any failure message
1. Make sure that the
microprocessor is
installed and seated
correctly.
2. If the computer does
not have the latest
level of BIOS code
installed, update the
BIOS code to the
latest level.
3. If the problem
remains, call for
service.
175 System thermal Failed Fan # n
(where n is the number of the failing fan)
Replace the indicated
fan.
Temperature sensed on system board is out of
range
Call for service.
Chapter 5. Solving problems
83