IBM IntelliStation Z Pro 6223, User Manual, Page: 37 / 134

installed, the computer will have no SCSI capability. If you disable the integrated
Ethernet controller and no Ethernet adapter is installed, the computer will have
no Ethernet capability.
This choice is on the full Configuration/Setup Utility menu only.
– Remote Console Redirection
Select this choice to enable and configure serial remote video and keyboard
redirection.
v Date and Time
Select this choice to set the date and time in the computer, in 24-hour format
( hour : minute : second ).
v System Security
Select this choice to set password settings. See “Passwords” on page 25 for
more information about passwords. You can also enable the chassis-intrusion
detector to alert you each time the computer cover is removed.
– Power-on Password
Select this choice to set or change a power-on password. See “User
(Power-on) password” on page 25 for more information.
– Administrator Password
Select this choice to set or change an administrator password. An
administrator password is intended to be used by a system administrator; it
limits access to the full Configuration/Setup Utility menu. If an administrator
password is set, the full Configuration/Setup Utility menu is available only if
you type the administrator password at the password prompt. See
“Administrator password” on page 25 for more information.
v
Startup Options
Select this choice to view or change the start options. Changes in the start
options take effect when you restart the computer.
You can set keyboard operating characteristics, such as the keyboard speed, and
you can specify whether the computer starts with the keyboard number lock on
or off. You can enable the computer to run without a diskette drive, monitor, or
keyboard. You can enable or disable USB support. If you disable the integrated
USB controller, the computer will have no USB capability; to maintain USB
capability, make sure that Enabled is selected for the USB Legacy Support and
USB devices options.
The startup sequence specifies the order in which the computer checks devices
to find a boot record. The computer starts from the first boot record that it finds. If
your computer has Wake on LAN hardware and software and the operating
system supports Wake on LAN functions, you can specify a startup sequence for
the Wake on LAN functions. You can also specify whether the integrated SCSI
controller or a PCI SCSI adapter has boot precedence.
If you enable the boot fail count, the BIOS default settings will be restored after
three consecutive failures to find a boot record.
You can enable a virus-detection test that checks for changes in the boot record
when the computer starts.
This choice is on the full Configuration/Setup Utility menu only.
v Advanced Setup
Select this choice to change settings for advanced hardware features.
Important: The computer might malfunction if these options are incorrectly
configured. Follow the instructions on the screen carefully.
This choice is on the full Configuration/Setup Utility menu only.
Chapter 3. Configuring the computer
23